Method for disinfecting a light incubator

The use of a light incubator is one of the essential steps to avoid the effects of bacteria on the experimental results.

First of all, the disinfection of laboratory equipment.

Disinfect the light incubator, first wipe the inner wall with alcohol, ventilate for 10 minutes, and irradiate with ultraviolet light for 30 minutes.

If there is no ultraviolet radiation, generally scrub with 70% ethanol, then scrub with 0.1% Xinjieer, then use potassium permanganate plus aldehyde to 1:1 ratio. Note that if you smoke, pay attention to the mixture immediately after leaving. Then close the cell culture chamber, because the taste is irritating, it is best to disinfect before the cells are raised. The bottom layer of the incubator is not allowed to put things, which will affect the uniformity and the environment that is not conducive to cell growth.

Care should be taken when using disinfectant. The incubator has sensors for detecting temperature, temperature and carbon dioxide concentration. Corrosive disinfectants or organic solvents may be damaged.

Different incubators have different cleaning methods. You should carefully read the product's specific operation manual or consult the incubator technical support. For some devices, please use with caution. Volatile formaldehyde is also toxic, flammable, and explosive. If formaldehyde remains in the incubator, it must be noted that it will affect cell growth.

Lactic Acid 80%

Lactic Acid 80%,Food Grade Lactic Acid 80%,80% Liquid Lactic Acid,High Quality Lactic Acid 80%

SHANDONG BAISHENG BIOTECHNOLOGY CO., LTD , https://www.baishengbioproducts.com