Fruit trees grafted two methods
劈 method: Anvil with a diameter of 3 cm or less should use this method. The length of the anvil is 3-5 cm. The "wedge" cut into the scion insertion area is 2-3 cm long and requires a straight and smooth surface. The two slopes are equal or slightly different. When inserting, it is required that the skin layer on the side of the scion should be aligned with the skin of the anvil cortex; the depth of the scion insertion should be aligned with the cutting edge of one noodle and the anvil cut, and 2-3 shoots remain in the scion. After the connection, the tightness of the tie should be tight. It can be wrapped in plastic and then tied with a string; or the main part can be fixed and then coated with wax.
Plug-in connection method: There are two methods of cutting and single bud insertion. Among them, the "wedge head" cutting method of the grafting connection method is the same as the splicing method. The difference is that the "wedge" is short and steep, the long slope is about 2 centimeters, and the short slope is 1 centimeter. When plugged in, the long slant faces the anvil wood. The cutting method for the single-bud grafting buds was to cut obliquely upwards at 1 cm under the buds, and cut them to the top of the buds together with the xylem. Then a knife was cut across the buds to remove single buds. The general method of inserting the anvil opening is "T" shaped opening. There are also "one point, one horizontal" type of the rootstock opening method for cuttings, and a method of cutting one knife directly on the cutting end of the anvil. After the plugging, the connection method is tied and the buds are exposed when the single buds are grafted.
Nutritious Food,Soft Gummy Candy,Vitamin Chewable Tablets,Analgesic Capsule
Guangzhou Etechange Biological Engineering Co.,Ltd. , https://www.etechange.com