Stainless steel safety valve pressure detection can not ignore the details

Any professional manufacturer will carry out factory tests and various details of the products produced. For stainless steel safety valves, the calibration is also indispensable, especially for pressure detection. However, there are many details that cannot be ignored.

When do I need to verify?

Under what circumstances does the stainless steel safety valve require pressure and related monitoring? First of all, it will be checked before leaving the factory, or it will be verified if it is stored for a long time and * times. Secondly, regular verification during use is also very important.

If the safety valve is seriously damaged during use or there are many potential problems, it needs to be verified. Of course, safety valves with damaged seals also require relevant testing.

Details in the check

In the verification process, you need to pay attention to a test environment and method. From a professional point of view, there are two common methods for verifying safety valves, one of which is online verification and the other is calibration. Generally speaking, if there are enough conditions for online inspection, Zui is better to adopt such a method, which is more in line with the actual operating conditions, so that the verification is more reliable. This method is more accurate and reliable for the determination of the return pressure. Such a calibration method cannot be used for the sealing test and needs attention.

The calibration and inspection of the stainless steel safety valve pressure is not negligible, which determines whether the safety valve performance and service life can be ensured. After all, this is a key component that determines whether or not the operation is safe.

paper-plastic pouch

Medical Packaging bags with one side medical dialysis paper and the other side medical composite film can be respectively suitable for: EO ethylene oxide, high temperature STEAM, GAMMA cobalt CO60 radiation sterilization packaging, such as hospitals for high temperature steam sterilization or sterilization of medical devices used to hold the items to be disinfected, sterile medical device manufacturers such as Syringes and catheters, probes, gauze piece, gown, artificial bone, artificial organs, pencil knife resistance bacteria medical sterile products such as packaging, and general steam sterilization temperature for a few minutes to half an hour in 121-134 degrees, ethylene oxide sterilization for a few hours, temperature of about 55 degree, irradiation at room temperature disinfection, about 2 minutes to complete, High temperature sterilization is not suitable for PET(polyester)/PE(polyethylene) colorless transparent medical composite film, because PE itself does not tolerate high temperature, glue is not resistant to high temperature,.. Irradiation sterilization is not recommended to use PET(polyester)/CPP(polypropylene), because irradiation radiation has aging embrittlement effect on CPP, and may precipitate harmful halides. Generally, the product is put into the bag in the clean workshop such as the 100,000-level purification workshop, and then sealed the bag with the heat sealing machine, put it into the carton, and put it into the sterilization cabinet after sterilization. Then, due to different materials, the bacteriostasis warranty period is generally divided into 1 year 3 years,5 years, have done aging verification, so as to ensure that before transportation, storage until finally opened by the hospital nurse, the medical products in the bag are sterile products, no need to sterilize, can be directly used.

Clear Tyvek Paper A4 Medical Lids 2 Png

paper-plastic bag;paper pouch;medical paper pouch

taicang hexiang packaging material co.,ltd , https://www.medpackhexiang.com