What should I do if the weight does not show up after the electronic scale is turned on?
What should I do if the weight does not show up after the electronic scale is turned on?
For example, if an electronic scale is turned on, the weight will not be displayed.
Step (1): First check the battery voltage of the electronic scale, which is higher than 6V. If it is lower than 5.7V, please charge it. If it is lower than 4.8V, and if there is no power after charging, please replace the battery.
Use the three-meter to go to the DCV gear 20V position, the red stick of the meter is placed at the position of the battery + end, and the black rod is placed at the position of the battery - end, the battery voltage is displayed. Usually, it is judged whether the quality of the battery is saturated by the charge, and the speed of the discharge, that is, when the charging circuit is normal, the battery cannot be saturated (the electric charge cannot be charged). Or you need to replace the battery when you have no power after less than a few minutes. (In general, the electronic said that after charging is saturated, it can be used for more than 100 hours, for example, without backlighting)
Step (2): If the fuse is open, please replace it if it is open.
Step (3): Whether the switch is defective.
Use the meter to go to the ?)) position, put the red rod and the black stick to the two ends of the switch, turn on the switch. If the beep sounds normal, replace the switch if there is no sound; Key words: electronic scale, electronics Weighbridge price, electronic hanging weight, weighbridge, analytical balance*
Kunshan Toptek Electronics Co., Ltd. T el:MP: No.1171, Shuixiu Road, Kunshan High-Tech Industrial Park* Related Information Electronic Weighbridge Weighing Instrument Troubleshooting Method Electronic Weighbridge Weighing Sensor Is Broken How to Detect Electronic Crane Scale Display Sometimes there is no way to deal with the electronic hanging scales - Toptek Electronics to tell you! ! In the process of using the electronic crane scale, how to repair the common electronic crane scale failure solution - Toptek Electronics to teach you! ! The electronic weighbridge digital display shows how to repair how to deal with the damp electronic weighbridge - Toptek Electronics tells you! ! Do you know the installation details of the weighbridge junction box? - Toptek Electronics to tell you!
Pain Relief Patch for Breast
[Name] Medical Cold Patch
[Package Dimension] 10 round pieces
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for breast hyperplasia, breast fibroids, mastitis, breast agglomera tion, swollen pain.
[How To Use a Patch]
Please follow the Schematic Diagram. One piece, one time.
The curing effect of each piece can last for 6-8 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
Store below 30c in a dry place away from heat and direct sunlight.
Pain Relief Patch For Breast,Pain Relief Plaster For Breast,Relief For Breast Pain,Pad Relief Patch For Breast
Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.xjpatches.com