Management Techniques and Key Points of High-yield Loofah Field

Many crops want to achieve high yield, can not do without field management, because in this field management stage, there are many measures that need to be done. Let’s learn about the high-yield field management techniques of loofah together to see what else you usually do not .

Management Techniques and Key Points of High-yield Loofah Field

1. Base fertilizer

The basic fertilizer is applied in the basic fertilizer ditch. The fertilizer is applied in strips. The compost is applied first, and then the chemical fertilizer is mixed and applied on the compost. Then it is made up and covered with silver-black plastic cloth. The top dressing should be applied every 3 weeks. The furrow should be irrigated before top dressing. After the water penetrates into the furrow, the top dressing should be applied to both sides of the furrow and the bottom of the furrow.

2. Prepare the land

For high borders, plow the open and shallow base fertilizer trenches on the planting rows according to the row spacing when the soil is semi-wet. After applying the base fertilizer, first make small borders, and then cover the borders of the small borders with silver-black plastic cloth, such as using a machine Operation, small cropping and covering with plastic cloth can be completed at one time, so that both sides of the plastic cloth are buried on both sides of the small cropping, so as not to be blown away by the wind. Later, as the loofah grows, the soil is cultivated again, and the broad-height border is completed. Before the loofah cultivation, the plastic cloth was planted with planting holes according to the plant spacing, and one plant was planted in each hole, and then watered after planting. It should be more sparsely planted in the high temperature period and densely planted in the low temperature period.

3. Sowing period

Loofah can be sown and cultivated annually, but it is most suitable to sow from December to August. When planting later in September after each place, although the earlier the more female flowers occur, the later the period of growth gradually enters the low temperature period, the growth is weaker, the fungal disease is stronger, and it is easy to age.

Management Techniques and Key Points of High-yield Loofah Field

4. Sowing seedlings

The seed shell of the loofah seeds is hard, especially the angular loofah, so it is appropriate to germinate and sow. That is, the seeds are taken out after soaking for 2 hours, and then the umbilical mounds of the seeds are rolled away and placed in the dark at 25-300C to germinate until the young shoots penetrate When the seed shell is sown, the seeds are sown to the plug tray with the medium, the seeds are laid flat, and the bud tips are down. The planting depth is about 1.5 cm. When the three leaves of this leaf are exhibited, they will be planted in the field. During the seedling raising period, the high temperature period is about 11-14 days, and the low temperature period is about 15-18 days. When raising seedlings for short-day sunshine varieties during long-term sunshine periods, it is best to perform shading and short-day treatment after the cotyledons are unfolded to promote the occurrence of female flowers.

5. Horizontal scaffolding

The shed surface is about 1.5 meters away from the surface, and the width of the border is 5-6 meters. It is made of high border, one row is planted in two rows, and the loofah is planted beside the border ditch, with a plant spacing of 0.4-0.5 meters. This method can also be used for grape cultivation. During the initial planting of loofah, other short-term crops can be intercropped on the border. If the horizontal scaffolding is affected by a hurricane, it is easy to be blown down by the wind because of the large wind surface. Therefore, the principle of autumn and winter is adopted. For example, spring and summer cropping is not suitable for dense planting. To reduce wind resistance.

6. Fertilizer and fertilization

In principle, the types and amount of fertilizer and the method of fertilization of loofah can refer to bitter gourd or cypress, that is, loofah has strong fertility, long growth period, simultaneous growth and results, and strong results, so it is still appropriate to continue fertilization after the results In order to maintain the continuous growth of stems and leaves, it can continue to produce results, and the output will increase, especially after continuous rainfall, some nutrients in the soil have been lost with rain, so it is appropriate to apply topdressing after rain.

7. Irrigation and drainage

The loofah stems have large leaves and large amounts of water evaporation, so it is advisable to pay attention to irrigation, and often keep it in a moist state. Irrigation is by furrow irrigation. When raining, pay attention to drainage, not to make the roots immersed in water, especially the corners, especially the angled loofah is not durable and wet, and the roots are easy to rot.

Management Techniques and Key Points of High-yield Loofah Field

8. Whole vine

Loofah has strong branching, such as when the stems and leaves are too lush, it is not only easy to grow long, and it is not easy to bear fruit. In the hurricane season, when the scaffold is cultivated, the scaffold is more likely to be blown down by the wind. Mani cut it early. When creeping, cultivate the main vines and furrow at right angles. When the scaffold is cultivated, if the stem vine hangs under the shed, it should be led to the scaffold so that the vines are evenly distributed on the scaffold.

9. Covering the border

Loofah likes high temperature, long growth period, and wide row spacing, so it is economical and effective to apply silver-black plastic cloth on the planting row (small crop border). If covered with straw, its effect is not as good as silver-black plastic cloth. When the short fruit variety is cultivated on the ground, grass should be applied to the entire border to prevent the fruit from contacting the ground and rotting.

10. Fruit bagging and fruit picking

In order to prevent the oviposition of melon flies, loofahs are usually bagged, and the bagging is carried out after the flowering period, and the bagging can prevent the blade from scratching the peel and blacken the skin, and make the peel lighter. Prevent pesticide pollution. Loofah can be used in old newspaper bags or thicker paper bags.

Disclaimer: Some articles of this website are transferred from the Internet. If the legal rights of third parties are involved, please inform this website for processing. phone

PC Board Venlo Greenhouse

Venlo structure is a popular one at present. This architecture uses horizontal girder as main bearer, forming a stable structure with columns. There is consolidation between horizontal girder and column, and hinge is used to connect column and foundation.
In Venlo greenhouse, foundation is made of reinforced concrete and the side wall is made of brick or reinforced concrete plate. The steel frame always use hot dip galvanized light steel. Roof beam adopts horizontal girder structure and using herringbone connection. The horizontal girder bears 2 or more roofs, which is made of aluminum alloy. This material is used as roof structure material and also glass inlay material. Other beams using gutter style to minimize the section. Delighting material of the roof and side wall using the hollow double-layer or multilayer PC board.
PC board is mainly made of PC/PET/PMMA/PP materials, it need sun screen coating to resist ultraviolet resist and ageing, and it is also required to be anti condensation and antidrug.
As a kind of light material, use PC board can greatly reduce the weight of greenhouse structure, and corresponding reduced the size of the steel frame, which saving the cost of steel.

Pc Board Venlo Greenhouse,Venlo Greenhouse,Venlo Type Pc Sheet Greenhouse

JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.alibabagreenhouse.com