Comparison of advantages and disadvantages of rubber and plastic insulation pipe construction scheme

Comparison of advantages and disadvantages of rubber and plastic insulation pipe construction scheme

In the process of external thermal insulation engineering construction, the outer wall of rubber and plastic insulation pipe is composed of four parts: wall structure layer, insulation layer, protective layer and veneer layer, and one of the exterior insulation projects is rubber and plastic. Insulation pipe insulation system. Dealing with the relationship between these four levels is the main technical key to the external wall insulation system.

To deal with the relationship between the components of the outer wall insulation wall of the rubber-plastic insulation pipe, the rubber-plastic insulation pipe needs to have a clear understanding of the connection between the components and the common problems.

Among them, there are several ways to connect the insulation layer, the protection layer and the structural layer:

Connecting rod bracket; oblique connecting rod bracket; long screw; bonding agent.

The above four connection methods have their own characteristics, but the first three kinds of construction are more troublesome, and the fourth one also involves problems such as bonding strength and durability.

The following four simpler options are recommended for this purpose:

Projecting nailing scheme; expansion bolt scheme; pre-embedded steel or plastic reinforcement scheme and bonding scheme of adhesive and nail.

These several solutions are not only convenient to construct, but also have good durability. To prevent and eliminate cracks in the protective layer and the facing layer, and to study measures to reduce the stress concentration and shrinkage stress of the protective layer, it is necessary to deal with the relationship between these three levels. The veneer layer is used as the visual effect of the external thermal insulation technology. The influence factor of the rubber and plastic insulation pipe is the weather resistance of the protective layer and the veneer layer, which needs to be properly handled during construction.

There are many kinds of feasible methods for this. It is quite effective to spray high-elasticity and weather-resistant exterior wall paint outside the protective layer. Because this coating has good elastoplasticity and waterproof function, Good anti-cracking and weathering resistance, so it has a protective effect on both the protective layer and the thermal insulation layer.

Therefore, in the implementation process of the external thermal insulation technology based on rubber and plastic insulation pipes, in order to ensure the construction quality, we must properly handle the various aspects of the insulation material composition of the rubber and plastic insulation pipe manufacturers, thus Users provide high quality architectural results.