Leafhoppers prevent early autumn and good grapes in the coming year
In autumn, grape growth enters the stage of nutrient accumulation. Management should not be ignored, otherwise it will affect the flower bud differentiation and fruit setting in the coming year. Grape leafhoppers are the most severely damaged from September to October, often causing leaf fall and affecting the growth of grapes in the coming year.
Harm characteristics Grape leafhoppers are divided into grape leafhoppers and grape leafhoppers. In addition to harming grapes, they also cause damage to crops such as apples, pears, and kiwis. Leafhoppers gather on the back of leaves to suck leaf juice as adults and weak insects. The symptoms of damage begin with the lower leaves and inner chambers of the branches and vines, and gradually spread to the upper part and the outside. The leaves appear small gray spots, causing premature aging of the leaves, and then developing into the entire leaf surface, causing the leaves to lose water and scorch, causing early leaf fall, affecting leaf photosynthesis The function and the accumulation of organic matter in the tree body cause the ears to fail to develop normally, and the fruit is easy to wilt and fall off, which will affect the output of the current year and the next year.
Causes of pests 1. There are many grape leafhoppers, but in order to prevent and control pests, some fruit farmers do not hesitate to increase the amount and frequency of pesticide use, resulting in fewer natural enemies of leafhoppers and rapid reproduction of leafhoppers. 2. The vineyards are closed, poorly ventilated, and humid, causing many weeds in the vineyards and on the ground, creating favorable conditions for the growth and reproduction of leafhoppers. 3. Failure to clean up dead branches and leaves in time after fruit picking caused overwintering adults not to be eliminated in time, resulting in a large number of leafhoppers in the coming year. 4. In recent years, the spring temperature has risen rapidly, causing leafhoppers to occur early and for a long time. In autumn, the temperature is relatively high, and it is easy to survive the winter safely. Especially in rainy years, it is more conducive to the growth and breeding of the tikka, causing more damage.
Prevention
1. Strengthen the management of the growing period of grapes, cultivate frequently, pruning and pruning reasonably, topping in time, sorting out long branches, preventing concealment of orchards, and improving ventilation conditions.
2. After autumn, remove the rotten fruits, dead branches and leaves in the orchard in time, and burn them together.
3. Leafhoppers have a strong yellowing tendency. You can smear armyworm oil on both sides of the yellow board and hang it above the grape branches. The yellow boards are separated by 5 meters. Remove and replace in time when the insects are full.
4. Leafhoppers have a certain phototaxis and can be trapped and killed by hanging solar insect traps in the vineyard.
5. Protect and make good use of natural enemies, and use natural enemies to control grape leafhoppers to the limit.
6. Focus on the control of the first generation of larvae from May to June and the last generation of adults from September and October until the grape leaves fall. It can be used to spray meticulously with the wettable powder, fenvalerate EC, and Nongdile EC. The spray site is mainly on the back of the leaves, which has a good control effect on grape leafhoppers.
Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone
Maxillofacial fixation system -- micro-plate for cranial and maxillofacial fracture fixation, designed for the surgical treatment of maxillofacial trauma fractures, suitable for the forehead, nose, orbit, zygomatic, maxillary region, and pediatric craniofacial bones.
The system is an orthopedic surgical instrument for neurosurgical tools. The maxillofacial fixation system includes micro-plates, straight plates, L-shaped plates, T-shaped plates, Y-shaped plates, double Y-shaped plates, H-shaped plates for cranial and maxillofacial fractures. The product range is complete, covering three-dimensional titanium mesh, self-drilling rotary bone screws, anatomical orbital floor plates, orthodontic nails, etc. However, the facial anatomical structure is special, and the screw plate needs to be placed away from the fracture line and avoid important anatomical structures such as nerves and teeth roots. Therefore, the specifications of the screw plate system are required to be as diverse as possible in order to be used in different bone structures, such as different radian, length, and number of screw holes. The bone plates forcranial and maxillofacial fractures are mainly divided into 1.5mm, 2.0mm and 2.4mm systems.
Titanium (including pure titanium and titanium alloy) is the most common material for hard tissue implants. Its elastic modulus and tensile strength are higher than those of human bone, and it is better than other metal materials such as nickel-titanium alloy and cobalt-chromium alloy in terms of biocompatibility and corrosion resistance. Our maxillofacial plate is made of titanium, and the self-tapping screws are mainly made of titanium alloy.
Jaw fractures include maxillary fractures and mandibular fractures. According to whether the fracture trauma is exposed, it can be divided into open fracture and closed fracture. Trauma is the most common cause of jaw fracture, which usually includes hit, traffic injury, fall injury, firearm injury, and a few iatrogenic injuries. All are caused by external forces acting directly or indirectly on the maxillofacial region. With the popularization of motor vehicles, the proportion of jaw fractures caused by traffic accidents has increased year by year, which has become the main cause of jaw fractures. In addition, neoplastic lesions in the maxillofacial region often lead to pathological jaw fractures.
In summary, maxillofacial fixation system has been widely used in clinical maxillofacial surgery, plastic surgery and ENT, and has a relatively mature market.
Titanium Plate,Rectangular Plate,orthognathic surgery,oral and maxillofacial
Jiangsu Aomed Ortho Medical Technology Co.,Ltd , https://www.aomedortho.com