Details of the 4 major classifications of the shovel dryer

Detailed explanation of the 4 major classifications of the 干燥 dryer

Jaw dryers are classified according to their structure. There are four types:
1. The transmission part of PZG 干燥 dryer adopts a stable and durable cylindrical gear reducer. The drive shaft adopts a thick stainless steel solid shaft. The boring teeth are made of high-strength cast stainless steel dents, which fully guarantee the 耙 type dryer. Stable operation in harsh working conditions. The heating medium can be steam, heat transfer oil or hot water. Suitable for the drying of loose powdery materials.
2, QZG 敲 type percussion stick dryer 耙 type percussion rod dryer is a model based on the ordinary 干燥 dryer to make adaptive improvement. Two or four tapping rods can be added inside the casing to facilitate rapid drying and pulverization of the material. The heating medium can be steam, heat transfer oil or hot water. It is suitable for easy agglomeration agglomeration before drying and loose material after drying.
3. JZG paddle dryer Dryer blade type rake dryer is a common type of drying machine combined with paddle dryer with large heat transfer area and fast drying rate. In addition to all the targeted advantages of the ordinary shovel dryer, due to the built-in hollow blade and mixing ribbon, it has stronger drying ability than the ordinary shovel dryer, the drying strength is doubled and the discharging speed is fast. The heating medium can be steam, heat transfer oil or hot water. It is suitable for materials with high solvent content, which needs to be quickly dried and completed at the same time; it has obvious advantages for materials containing organic solvents.
4. LZG double-spinning belt type dryer The double-spin belt type dryer is a model based on the improvement of the common type of dryer. In addition to all the targeted advantages of the ordinary shovel dryer, due to the forced continuous turning and mixing of the built-in positive and negative double ribbons, the materials in the drying process are difficult to agglomerate and agglomerate, and are suitable for vacuuming loose materials that are easy to agglomerate and agglomerate. dry. together can use as a mixer. The heating medium can be steam, heat transfer oil or hot water. Suitable for loose powder and granular materials to complete drying and mixing.