Working principle and precautions of electric heating sandwich pot

The working principle of the electric heating sandwich pot is that the electric heating rod at the bottom of the middle layer jacket of the pot body heats the heat conduction oil in the jacket, so that the material in the pot is rapidly heated for a short time. The electric heating sandwich pot uses electric heating heat-conducting oil as the medium, has large heating area, high heat efficiency, uniform heating, short heating time and easy temperature control. It can be added with stirring device, scraping bottom, scraping edge, non-stick pan, no Stirring dead angles, mixing evenly, meeting hygienic requirements and complete safety accessories, beautiful appearance, easy installation and operation, safe and reliable.

The fixed type mainly consists of a pot body and a leg; the tilting type is mainly composed of a pot body and a tilting frame; the stirring type is mainly composed of a pot body and a stirring device. The sandwich pot uses steam with a certain pressure as the heat source and can also be electrically heated. The electric heating sandwich pot has the characteristics of large heating area, high thermal efficiency, uniform heating, short boiling time of liquid material, easy control of heating temperature, etc. The inner pot is made of acid-resistant and heat-resistant stainless steel, equipped with a pressure gauge and a safety valve. It is beautiful in appearance, easy to install, easy to operate, safe and reliable.

The electric heating sandwich pot and the material contact parts are made of stainless steel, which is durable and meets the requirements of GMP standards.

In order to better use the electric heating sandwich pot, the operator should pay attention to the following matters during use:

1. First check if the power supply is connected and there is no leakage;

2. Check if there is lubrication on the part with bearing;

3. The heat transfer oil is not easy to join too many achievements, otherwise it will overflow;

4. The venting hole can not be blocked, otherwise the oil temperature is too high and it is easy to cause an accident;

5. If it is used too frequently, it is necessary to replace the heat transfer oil regularly and clean the heating rod, which is beneficial to improve the heating efficiency and prolong the service life of the sandwich pot;

6. If the electric heating sandwich pot is discharged, the air outlet should be blocked first to prevent the hot oil from overflowing and injuring people;

7. Dry your hands during operation, do not bring water to prevent electric shock.