Introduction to the operation specification of automatic granule packing machine
Let's share the operating specifications of the fully automatic granule packing machine as follows:
1. The powder automatic packaging machine checks whether the specifications of the cup and the bag maker match the requirements before starting the machine.
2. Dial the main motor belt by hand to see if the machine is running flexibly. After confirming that the machine has no abnormal conditions, it can be powered on.
3. Under the powder automatic packaging machine, the packaging material is placed between the two paper rollers, which is placed in the groove of the paper arm of the machine. The paper stopper should clamp the core of the material to make the packaging material and system. The bag is aligned, then tighten the knob on the cover and ensure that the printed side faces forward or the composite side (ie polyethylene side) faces backwards.
4. Turn on the main power switch, press the clutch handle, separate the metering mechanism from the main drive, turn on the start switch, and the machine runs dry.
5. If the conveyor belt rotates clockwise, stop immediately. At this time, the main motor is reversed. After the motor is inverted, the belt is rotated counterclockwise.
6. Set the temperature and set the heat sealing temperature on the temperature controller of the electric control box according to the packaging materials used.
7. Adjust the length of the bag. Put the packaging material into the bag-making device according to the relevant regulations, clamp it between the two rollers, rotate the roller, and pull the packaging material below the cutter. After reaching the set temperature for 2 minutes, turn on the start switch. Loosen the lock nut of the bag length adjustment screw.
Automatic granule packing machine picture:
best selling:
Moon cake packaging machine [recommended] suitable for packaging all kinds of solid food, medicine, daily necessities, hardware, etc.
Candy packaging machine [recommended] suitable for packaging all kinds of solid food, medicine, daily necessities, hardware, etc.
Hardware packaging machine [recommended] suitable for packaging screws and nuts, gaskets, nails, bolts, electronic components, hardware tools, etc.
Shanghai packaging machine [recommended] suitable for packaging grain, feed, fertilizer, wood pellets, inorganic salts, etc.
Shanghai vacuum packaging machine [recommended] suitable for vacuum packaging food cooked food, fruits and vegetables, rice grain, granular powder, electronic parts, etc.
Quantitative filling machine [recommended] suitable for quantitative filling of various pastes, sauces, liquids, semi-fluids, etc.
Food dispensing machine [recommended] suitable for dispensing 1-5000 grams of various strips of tea, granule tea, small dose of granular powder materials, etc.
Laser Distance Sensor
Leading Laser Measure Module Factory in China
The World's First single transmitting single receiving design laser module, which has a big help to reduce producing cost and power consumption of the laser distance sensor.
This Laser distance sensor has high Accuracy up to ±1 mm, working as phase measure, which support RS232/RS422/RS485/Arduino to TTL communication.
This laser distance module is widely used in the Laser Distance Meter industry, also a very good choice for the Industrial applications. Most of measuring tools manufactures is purchasing from us in China.
Product Specifications:
|
Accuracy
|
±1
mm (0.04 inch)
|
|
Measuring
Unit
|
meter/inch/feet
|
|
Measuring
Range (without Reflection)
|
0.03-150m
|
|
Measuring
Time
|
0.1~3
seconds
|
|
Laser
Class
|
Class
II
|
|
Laser
Type
|
635nm,
<1mW
|
|
Size
|
45*25*12mm
(±1 mm)
|
|
Weight
|
About
10g
|
|
Voltage
|
DC2.0~3.3V
|
|
Electrical
Level
|
TTL/CMOS
|
|
Frequency
|
10Hz
|
|
Operating
Temperature
|
0-40 ℃ (32-104 ℉ )
|
|
Storage
Temperature
|
-25~60 ℃ (-13~140 ℉)
|
Range Sensor,Laser Distance Module,Distance Sensor,Laser Measure Sensor
Chengdu JRT Meter Technology Co., Ltd , https://www.jrt-measure.com
