1, raw material formula. 50 kg of fresh snails, 2.5 kg of salt, 4 kg of vegetable oil, 450 g of MSG, 5 kg of fresh ginger, 1.5 kg of garlic, 250 g of pepper, 250 g of paprika powder, 30 g of powdered anise, 150 g of cinnamon, 150 g of dried tangerine peel, cooking wine 1.8 kg.

2, grade finishing. The snails suitable for processing are 3-6 g/piece and can be divided into 2-3 grades by weight. The graded fresh snails are soaked in a tank containing clean water for about 6 hours. A small amount of salt and vegetable oil can also be placed in the water to encourage the snails to quickly puff up dust. Then the tail snails are used to remove the tail and smooth out. Leave 2 threads for degrees.

3, saline water stains. The modified snails were immediately placed in 2% salt and 3% baking soda for 15-3O minutes. The liquid temperature was kept below 10°C, and some of the bacteria died of dehydration and dehydration of snails.

4, rinse and drain. Put the snail into the rinsing tank and rinse it for about 30 minutes. Rinsing water temperature should be below 10 °C, rinsing to remove sediment and shell debris contained therein. Rinse and wash after use.

5, dislocation treatment. The appropriate amount of snail (depending on the size of the wok) and salt, stir in the pot for 5-8 minutes, then rinse and rinse.

6, fried seasoning. The rapeseed oil (1 serving of snail meat, 2 servings of vegetable oil) was placed in a pot and was put into the snail for 2-3 minutes until the snail meat became golden yellow. Then dip it into the sauce for about 1 minute and remove it. The preparation method of seasoning liquid is to add ginger, cinnamon, dried tangerine peel and the like in the formula by boiling for 1 hour, filter, add other ingredients except for removing wine, boil and dissolve, finally add the wine and then filter.

7, packaging sterilization. The prepared snails should be bagged with polyester/lead foil/polypropylene compound bag as soon as possible, 100 grams per bag, and sealed with a vacuum sealer. Do not contaminate the bag when bagging. Remove the broken and sealed bags, and wipe the water on the bags.

Bathroom Anti Slip Tape

Bathroom Anti Slip Tape

Bathroom anti slip tape from Jerrytape is based on soft PEVA or PU material, which is environmentally friendly and skin friendly, people can walk on it without shoes. It`s coated with upgraded acrylic adhesive, has excellent waterproof ability and good adhesion. It can be used for many wet and smooth areas, even can be used under water, such as bathroom, bathtub, swimming pool, stairs, kitchens, gymnasiums, ship, etc. And it leaves no residue when removal, easy to clean. Compared to general anti slip tape, it is PVC free and sands free.

Product specifications:

Product name: Bathroom anti slip tape / PEVA anti slip tape

Colors: Clear, black, white, grey, also offer printing.

Sizes: 25mm / 50mm / 75mm / 100mm /150mm x 3m / 5m / 18m/ 25m. Also can customize almost any size according to your demand. Also can offer sheets, such as 20 x 380mm strips, 4" x 24", 4" x 32", 6" x 30", 6" x 32", 8" x 40" treads, which are very hot sell on Amazon. Also can be special shapes, such as round sheets, snow shape, S shape, etc.

Package: Shrink wrapped or OEM package, such as Shrink + round card, shrink + sleeve card, shrink + color box, etc.

Bathroom anti slip tape, PEVA anti slip tape, non slip treads, anti slip treads, shower anti slip tape

Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytape.com