Analysis of the 7 major medical device giants and market development in orthopedics

First, the evolution of domestic orthopedic medical equipment development

The development of orthopedic medical devices in China is not long. The time is only about 20 years. The orthopaedic medical equipment market in the 1990s basically belongs to the buyer's market. Many orthopedic surgeons are looking for manufacturers to find some suitable products. In the 1990s, foreign capital gradually entered. At the same time, a number of local national enterprises were born.

Orthopaedics mainly studies the anatomy, physiology and pathology of the musculoskeletal system. The treatment methods mainly include drugs, physical therapy and surgical treatment. Among the above three treatment methods, the treatment is more important, accounting for the largest proportion.

According to the physical structure, medical devices can be divided into internal fixation and external fixation. The internal fixation called internal fixation mainly includes joints, bone plates, screws, etc. External fixation is a fixed method in vitro. Including external fixators, splints, bandages, gypsum, etc., the two methods are mainly based on internal fixation, and both methods are used to fix the fracture end and promote the formation of osteophytes as soon as possible.

Second, the concept of orthopedics and its academic classification

From the perspective of treatment, orthopedic medical devices can be divided into trauma, spine, joints, and athlete's foot. Trauma is the most common and basic, followed by spine and joints. Now there is a new family of amphipae, which is now classified more carefully in some large hospitals, and some even subdivide the spine into cervical vertebrae. Lumbar vertebrae and so on.

The first is trauma, and the trauma is divided into pediatric trauma and adult trauma. The commonly used instruments for trauma include bone nails, external fixators, etc. The internal fixation method of trauma can be subdivided into external fixation and intramedullary. Fixation, external fixation mainly includes steel plate and screw. Intramedullary fixation is mainly used for some intramedullary nails (nails) in dry bone fractures. Many intramedullary and extramedullary fixations are common. Many indications can be used in two ways. Treatment can be selected according to the surgeon's preference and technique;

Followed by the spine class, the spine class can be divided into trauma and degenerative disease clinically. The trauma is mainly the external force such as car accident or high altitude fall fracture. The degenerative disease mainly refers to the daily lumbar disc herniation, including some Congenital malformations, tumors, internal fixation of the spine include screws and the anterior cervical plate, as well as some products for minimally invasive vertebral body formation;

Finally, the joints are mainly connective tissues composed of soft tissues and ligaments of the human body. The largest joints are mainly hip joints and knee joints. Others such as elbow joints have a small amount of surgery, and hips and knee joints are the main;

In addition, there are ankles, which are emerging disciplines in recent years. They were previously hand-foot surgery and are now listed separately as foot-and-stomach. In recent years, with the development of some medical device companies, some new products have been introduced. Before the doctors of the Foot and Foot Department did not have many products to use, basically the Kirschner wire and then the screws. The wounds were mainly external injuries. The orthopedics were mainly problems of degenerative diseases. They were not noticed before, but now the patient volume Much.

10000Hz High Frequency LiDAR Module

10000 Hz is one of our 2021 new solutions products,which can be widely used in drone postioning, car anti-collision, intelligent traffic monitoring etc. with high accuracy. We support customized service of different frequency(100hz,200hz,300hz,400hz,1000hz,5000hz,10000hz etc.), you can choose the suitable design. And the LiDAR module is a small size with 43*35*21mm, customers can be integrated to their measure device easily. If you meed any documents(PDF files etc.) of JRT high frequency LiDAR distance sensor, please contact us now.

Some key features may help:
Accuracy: ±3~5cm(<50m) /±1%(>50m)
Range: 0.1-200m
Resolution: 1cm
Frequency: 100/200/400/1k/5k/10khz
Laser type: 905nm,Class I
Size: 43*35*21mm
Weight: 20g
Input voltage: 8-36V

10000Hz High Frequency LiDAR Module,LiDAR,High Frequency LiDAR Module,10000Hz LiDAR Module

Chengdu JRT Meter Technology Co., Ltd , https://www.accuracysensor.com