Yunfei brand automatic insect test light operation guide
1. Installation: According to Yunfei The test light installation drawing (available at http://) can be used to build a cement base at the installation site. The mounting hole on the bottom of the base is automatically installed according to the mounting hole on the bottom of the automatic insect detection lamp. (Or reserve the anchor bolt hole. Insert the bolt into the reserved hole during installation. After the test light is installed, fill the bolt hole with cement slurry). After the base cement is solidified, the test light is fastened to the base.
2. If you want to fix the lamp body to the work site for a long time, keep the locking device when designing the base.
3. Turn on the power, the power indicator light is on, push up the leakage protection device, turn on the controller power switch, the switch indicator light is on; the display enters the loading state - the display starts to start. Enter the main page first to see the menu bar display: timing control, manual control, data settings, 20XX-XX-XX XX: XX (date display) button.
Select the data setting button in the menu bar to set the parameters and select the time parameters to be worked.
1 Select the data setting button in the menu bar to set the parameters and select the time parameters to be operated.
a. Time period setting: set the working time period.
b. Interval time: set the time when the two movable doors of the processing bin are alternately opened.
c. System time: adjust the time and date of the system.
2 After setting the data, select the timing control button in the menu bar. After entering, click the timer to start, and the system can run according to the preset parameters.
3 Click the timer to stop, the system exits the timing mode and enters the light control mode.
4 first turn off the timing control, then click the manual control menu button, the system enters the manual control mode, you can see the submenu button, respectively, the rollover, insect killing lamp, heating tube, emptying the insecticidal bin, emptying the drying bin, changing the warehouse , point-to-point control can be achieved.
5 There is a current status column in the menu bar to view the status of the machine in real time.
4. Check before use (daytime): Open the door of the test light, and check the operation of the test light by the following steps through the display panel inside the cabinet.
1 Cover the light sensor, the light trap light is on - working at night.
2 Use the clear water to enter the rain sensor, the trap light tube is extinguished immediately, and the whole lamp enters the rainproof state. After the rain stopped, the rainwater in the rain sensor was about 1 minute later, and the trap light source was turned back on.
3 minutes later (time adjustable), the cabinet has insecticidal storage worm disk rotation sound; then at the same time interval, drying the warehouse worm disk rotation - far infrared processing warehouse to complete a worm.
4 Remove the obstruction on the light sensor, and the light source of the trap light is still working. After about 1 minute, the trap light is extinguished, and the dumping position is turned to the rainy state. The insecticidal bin rotates, the drying bin rotates, and the shifting bin rotates. Grid, complete a conversion of the insect box work, at this time the test light completes a day and night simulation cycle, and returns to the standby state.
5. Enter the manual control menu, press the roll once, and turn the position to rotate one position. The turntable is rotated clockwise, and the insect box at the insect bed is rotated six times to reach the door of the cabinet for easy insect picking.
2. If you want to fix the lamp body to the work site for a long time, keep the locking device when designing the base.
3. Turn on the power, the power indicator light is on, push up the leakage protection device, turn on the controller power switch, the switch indicator light is on; the display enters the loading state - the display starts to start. Enter the main page first to see the menu bar display: timing control, manual control, data settings, 20XX-XX-XX XX: XX (date display) button.
Select the data setting button in the menu bar to set the parameters and select the time parameters to be worked.
1 Select the data setting button in the menu bar to set the parameters and select the time parameters to be operated.
a. Time period setting: set the working time period.
b. Interval time: set the time when the two movable doors of the processing bin are alternately opened.
c. System time: adjust the time and date of the system.
2 After setting the data, select the timing control button in the menu bar. After entering, click the timer to start, and the system can run according to the preset parameters.
3 Click the timer to stop, the system exits the timing mode and enters the light control mode.
4 first turn off the timing control, then click the manual control menu button, the system enters the manual control mode, you can see the submenu button, respectively, the rollover, insect killing lamp, heating tube, emptying the insecticidal bin, emptying the drying bin, changing the warehouse , point-to-point control can be achieved.
5 There is a current status column in the menu bar to view the status of the machine in real time.
4. Check before use (daytime): Open the door of the test light, and check the operation of the test light by the following steps through the display panel inside the cabinet.
1 Cover the light sensor, the light trap light is on - working at night.
2 Use the clear water to enter the rain sensor, the trap light tube is extinguished immediately, and the whole lamp enters the rainproof state. After the rain stopped, the rainwater in the rain sensor was about 1 minute later, and the trap light source was turned back on.
3 minutes later (time adjustable), the cabinet has insecticidal storage worm disk rotation sound; then at the same time interval, drying the warehouse worm disk rotation - far infrared processing warehouse to complete a worm.
4 Remove the obstruction on the light sensor, and the light source of the trap light is still working. After about 1 minute, the trap light is extinguished, and the dumping position is turned to the rainy state. The insecticidal bin rotates, the drying bin rotates, and the shifting bin rotates. Grid, complete a conversion of the insect box work, at this time the test light completes a day and night simulation cycle, and returns to the standby state.
5. Enter the manual control menu, press the roll once, and turn the position to rotate one position. The turntable is rotated clockwise, and the insect box at the insect bed is rotated six times to reach the door of the cabinet for easy insect picking.
China Pigment Suppliers
Here you can find the related products in Pigment, we are professional manufacturer of Pigment. We focused on international export product development, production and sales. We have improved quality control processes of Pigment to ensure each export qualified product.
If you want to know more about the products in Pigment, please click the Product details to view parameters, models, pictures, prices and Other information about Pigment.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Pigment!
Lycopene, Amaranth, β-Carotene, Beta carotene, Carmine, Food Colorant
Xi'an Gawen Biotechnology Co., Ltd , https://www.ahualynbio.com