What should be paid attention to when cooling a motor vehicle
First, avoid opening the lid and add water immediately. After the water in the radiator boils, there is a certain amount of pressure inside. If the radiator inlet is opened immediately, hot water will be sprayed to burn people.
Second, avoid boiled immediately after the flame. The reason why the engine is boiling is because the water temperature in the water jacket is too high. If the flame is turned off at this time, the components are in an expansion state. The gaps between the fittings are very small. After shutting down, the soft metal will fall off, and some may even cause sticking.
Third, bogey in the engine temperature is too high when poured cold water pouring engine, otherwise it is easy to cause the engine block burst due to rapid cooling.
Fourth, bogey in the tire temperature is too high, splash water cooling. When the temperature of the tire is high, splashing cold water on the tire can cause various deformations between the layers inside the carcass, causing early damage to the tire and even peeling of the cord.
N95 Face Mask Online,Kn95 Approved Face Mask,Kn95 Approved Mask,Kn95 Respirator Mask
Guangdong Jia Mei Biological Technology Co.Ltd , https://www.jaymeimask.com