Medical Sagittal Saw Bone Drill
Model NO.: 4101
Output Power: Over 100W
Oscillations (Osc/Min): 0-16000
Operation(V) Voltage: 14.4
Sterilization: 155°c
Noise(dB): Below 75
Trademark: EndoTop
Transport Package: Carton Lined with Foam
Specification: SGS
Origin: China
HS Code: 9018903000
Sagittal Saw
1. Enhanced motor based on system 1000, 10% more power.
2.155 autoclavable.
Application:
For application in cutting bone during joint surgery.
With the perfect shape of ergonomic design, whole unit is autoclavable, motor is imported, low noise, steadily and quickly cutting, no damage for soft tissue, long service life, be warranty for 1 year. A variety of different thickness or the length of the saw blade for your selection. Common length are 70mm, 90mm and 100mm, common thickness are 0.8mm, 1.0mm, 1.2mm and 1.27mm, saw blade also can be customized according to your request.
Notes:
1. Sterilize temperature ≤ 135 ° C (Improved type ≤ 155 ° C), if the temperature is over 135 ° C, the motor will be damaged.
2. Normal bone drill can only hold drill bits less than 6mm, acetabulum reaming drill with big torque, rpm is around 300, canulate drill is used with nail or K wire, rpm is around 600.
3. The battery need to be get out of the power tool after surgery. Otherwise the small automatic discharge of the electric will make the life of the battery short.
4. The battery cannot be sterilized, it is not autoclavable.
5. The cranial bur must be washed right after the surgery by purger in order to avoid the blood stick in the bur, then we should make it dry.
6. The battery space in the handpiece of the tool should not have any water, after sterilization.
7. The cranial bur blade is made of medical stainless steel, in order to avoid broken, so it is flexible and not very hard, it is easy to be attrite, we suggest each blade only use for 1 surgery.
Output power | ≥100w |
Speed(r.p.m)Â | / |
Oscillations (osc/min)Â | 0-16000 |
Torque(Nm) | / |
Operation(V) voltage | 14.4 |
Sterilization | 155°C |
Swings (°) | / |
Noise(db) | ≤75 |